Skip to main content
Building & Interiors

Warehouse Conversions In Surry Hills And Darlinghurst

John OwenFounder4 min read

A warehouse conversion in Surry Hills or Darlinghurst is an industrial building fitted out as homes, and its maintenance follows from that. The brick shell and the heavy floors were built for storage and light industry, and the kitchens, bathrooms and wiring were added later, inside a structure that was never planned around them.

That mismatch is where most of the trade work in these buildings comes from.

The building stock

Both suburbs sit in the City of Sydney, and both are heavily leased. Surry Hills carries boutique apartments and adaptive-reuse buildings alongside a cluster of small hotels. Darlinghurst mixes terraces, warehouse conversions and boutique accommodation.

Much of both suburbs sits in heritage conservation areas under the City of Sydney's planning controls. That matters as soon as a job touches a facade, a window or a roof, because what can be changed outside is more limited than what can be changed inside.

Long waste pipes

In a purpose-built apartment block, bathrooms stack above each other around a shared drainage stack. In a conversion, wet areas went wherever the floor plan allowed, so waste pipes can run a long way sideways before they reach a stack.

A long run with a shallow fall is where blockages build up and where a slow drain becomes a regular call. The pattern is explained in [blocked drains and what the blockage tells you](/blog/blocked-drains-and-what-the-blockage-tells-you), and in a conversion the answer is often a camera inspection of the whole run rather than another clear at the trap.

Exposed services

Many conversions keep the original ceilings, exposed timber beams or a concrete soffit, as a feature. There is no ceiling space to hide a cable in, so the wiring sits in surface conduit or inside bulkheads built for the purpose.

Any change to the lighting has to match that. A new fitting needs its cable run in conduit that sits square with the conduit already there, and a bulkhead that is opened has to be closed and painted to match. Done carelessly, the new work is the first thing anyone notices in the room.

High ceilings

High ceilings are the selling point of these apartments and the reason a simple job needs more planning. Changing a light fitting well above head height needs a platform ladder or a mobile scaffold, and a skylight or high window needs safe access before anyone can work on it.

Fitting long-life LED lamps and fittings at that height is worth doing the first time, because every change after that means bringing the platform back.

Condensation on high glazing is common in these spaces too, and the causes are the same ones set out in [skylights, roof windows and condensation](/blog/skylights-roof-windows-and-condensation).

Timber floors and sound

Some conversions kept the original hardwood floors. Others laid new timber over the old structure. Either way, a timber floor between two apartments carries footsteps and voices to the unit below, and strata by-laws often limit what can be laid without approval.

A floor that needs work is a question of sanding, repairing boards or replacing, with the acoustic underlay considered whenever a floor is relaid.

Steel windows and old brick

Large steel-framed windows are part of the look. Over time the frames rust at the bottom rails, the putty or seals fail, and the window lets in draughts and water. Repairing the frame, resealing the glass and painting it is careful work, and in a conservation area the repair keeps the window's original appearance.

The brick shell has its own needs. Parapets, box gutters and old downpipes collect water, and a blocked box gutter sends it straight into the top floor.

For agents and building managers

A conversion rewards a team that knows the building. That means a plumber who knows where the long run goes, an electrician who works neatly in conduit, a carpenter and painter who close a bulkhead so it disappears, and someone who checks the conservation rules before a window is touched.

With one team holding all of that, a fault is diagnosed once and the finished work looks as if it was always there. See our maintenance in Surry Hills and Darlinghurst.

Our maintenance work. Talk to us about a property.

JO

John Owen

Founder

Ample Trade, every trade a property needs held by one accountable team on one contact, across the Eastern Suburbs and the Sydney CBD.

Surry HillsDarlinghurstOlder BuildingsHeritageApartments

Tell us about your building.

We will respond with a clear understanding of how we can help.

Get in Touch