Skip to main content
Every Trade, One Team

A Hotel Room Fault Before Check-In

John OwenFounder5 min read

A fault found in a hotel room before check-in comes down to one decision: can the room be repaired and guest-ready in time, or does it go out of order while the guest moves to another room. The answer depends on the fault, the cure time of whatever gets used to fix it, and how much of the job a guest next door will hear.

That call is easier when whoever answers the message can read the fault across every trade, because a leak near a light is a plumbing fault and an electrical fault at once.

The first message

A clear message saves the first round of questions. Send the room number, a photo, the check-in time and whether the rooms on either side are occupied.

Add what housekeeping noticed and when. A patch on the ceiling that was not there yesterday tells a very different story from one that has been slowly spreading for a month, and it decides who needs to go up to the room above.

Faults that take a room out

Some faults stop the room selling until they are properly fixed.

Water through a ceiling or a wall. The source has to be found, and it often sits in another room. A ceiling light or a power point in the wet patch stays off until it has been tested. The first steps are in [water coming through a ceiling in an apartment](/blog/water-coming-through-a-ceiling-in-an-apartment).

A dead power point or a sparking fitting. A guest will find it, and an outlet with a fault is not safe to leave for later.

A failed lock or a door that does not latch. Nobody can sleep in a room that does not secure.

No hot water, or a toilet out of use. No guest will put up with either one.

A smoke alarm fault. In many hotels the detector in the room is wired back to the building's fire panel, so any work on it is arranged with whoever looks after that panel.

Faults that can be fixed around the booking

A dripping tap, a loose towel rail, a stuck curtain track, a chipped skirting and a blown lamp can usually be repaired in the gap between check-out and check-in. They are also the items that pile up. A pre-arrival list of several small jobs across several trades is the normal shape of this work, and it is where one contact matters more than any single repair.

The order in one room

With one window and several small jobs, the order saves the room. Electrical comes first, with the power isolated and restored, then water, then the carpentry and fixings. Anything that needs to dry comes last, and the room is handed to housekeeping after the dust has stopped.

Cure times

This is the trap that catches a rushed room. Silicone needs time to cure before the shower is used, and the time is printed on the tube. Fresh grout, filler and paint have their own drying times, and fresh paint has a smell that a guest notices the moment the door opens.

So a shower joint split at midday is not a job for a 2pm arrival. It goes on the list and gets cleaned and resealed the next night the room is empty. If it cannot wait, the room comes out of sale for the night. Silicone timing and the signs of a failed joint are in [silicone joints and when they need replacing](/blog/silicone-joints-and-when-they-need-replacing).

Guests next door

Drilling through a shared wall is heard in the next room, and the room above hears anything at the ceiling. Noisy steps are saved for when neighbouring guests are out, and that timing comes from the front desk.

Tools travel in closed bags through the back-of-house route, and the service lift is used wherever one exists. The wider approach to working around guests is in [guest-ready, discreetly, trade work in a boutique hotel](/blog/guest-ready-discreetly-trade-work-in-a-boutique-hotel).

The test before handback

A room is not finished when the part is fitted. Every tap is run hot and cold, the toilet is flushed and checked, the shower is run with the drain watched, the lights and power points are tested and the air conditioning is run on heating and cooling. The lock gets tried from both sides of the door.

Then the area is cleaned and handed back for housekeeping's final check, with a note of what was done.

The pattern behind the fault

One fault in one room is a repair. The same fault in the same room a month later is a cause that has not been found, and the same fault in the rooms stacked above and below points at a shared pipe or riser.

A record of each fault by room makes that pattern visible, and it means a warm room and a drip on the floor below get read as one problem, as in [a warm room and a dripping unit are one problem](/blog/a-warm-room-and-a-dripping-unit-are-one-problem).

Over time the manager stops running a roster of trades at all. The problem goes to one contact, and the guest never sees it.

How we work with hotels. Talk to us about a property.

JO

John Owen

Founder

Ample Trade, every trade a property needs held by one accountable team on one contact, across the Eastern Suburbs and the Sydney CBD.

HotelsMaintenanceGuest RoomsDiscretionEvery Trade

Tell us about your building.

We will respond with a clear understanding of how we can help.

Get in Touch