Skip to main content
For Property Managers

Writing A Work Order A Trade Can Act On

John OwenFounder4 min read

A work order that reads "kitchen tap leaking, please fix" is the start of a phone call, not a job.

The trade has to ring the agency for the tenant's number, ring the tenant for access, ask what kind of tap it is, find out whether the owner has approved the work, and then find out who the invoice goes to. Each of those is a delay, and each one can be avoided with a few lines written at the start.

The address, written the way a trade needs it

Unit number, street number, street and suburb come first. Then the details that make the address usable: the building name if it has one, which entrance to use, where to park, and whether there is a loading zone or a visitor space.

On a strata building, add whether the building manager needs to be contacted first. That is often the difference between getting into the unit and waiting in the lobby, as set out in [access, keys and getting into an occupied unit](/blog/access-keys-and-getting-into-an-occupied-unit).

Who to contact and how

The tenant's name and mobile, and the best time to call. If the tenant would rather be contacted by text, or English is their second language, a short note saying so helps the trade plan the conversation.

If the property is vacant, say so, and say where the keys are.

The fault, described plainly

Say what has happened, where it is, and since when. "Kitchen mixer tap dripping from the spout, started last week, worse when the handle is pushed down hard" tells a plumber far more than "tap leaking".

Two details make the biggest difference.

A photo or a short video. It shows the make of the fitting, the extent of any damage and whether there is water where there should not be, so the right part comes on the first attendance. It is also the start of the evidence trail described in [the photo report and why it settles arguments](/blog/the-photo-report-and-why-it-settles-arguments).

Anything the tenant has already tried, such as turning off an isolation valve, resetting a safety switch or using a plunger.

How urgent it is

Say whether the job is an emergency, urgent or routine. A burst pipe, no hot water, a total loss of power or a security problem is urgent, while a dripping tap is routine. The difference decides the response time and often the notice period, and the line between them is drawn in [emergency or scheduled, what warrants a callout](/blog/emergency-or-scheduled-what-warrants-a-callout).

What the trade is approved to do

This is the line most often missing, and it causes the most delay.

State whether the trade can go ahead with the repair on the day up to an agreed limit, or whether they must quote first and wait. If the owner has a preference, such as repair rather than replace or a particular brand of fitting, put it in the work order.

Without that line, a trade who finds a worn-out mixer has to stop, leave, quote, wait for approval and come back another day.

Who pays and who gets the invoice

Give the owner's name or the account reference, and the email the invoice goes to. On a strata property, say whether the work is believed to belong to the lot owner or the owners corporation, because a leak from a common property pipe is billed differently from one inside the lot. That split is covered in [common property or lot owner, who pays](/blog/common-property-or-lot-owner-who-pays).

Pets, alarms and anything else

A dog in the yard, an alarm code, a gate code, or a tenant who works nights and sleeps during the day. These take seconds to write, and they save a wasted trip.

A template that works

Keeping a short template in the property management system and filling every field every time is the simplest improvement an agency can make to its maintenance.

Property: unit, address, building name, entrance and parking.

Contact: tenant name, mobile, best time to call and preferred method, or vacant with the key location.

Fault: what, where, since when, photo attached, and anything already tried.

Urgency: emergency, urgent or routine.

Approval: proceed up to the agreed limit, or quote first.

Billing: owner or owners corporation, and the invoice email.

Notes: pets, codes and the building manager's contact.

What changes on the other side

A work order with that information lets the job be booked in one call, attended with the right parts, and finished on the day.

With one team handling every trade, it also means a single work order can carry the whole list. A dripping tap, a sticking door and a flickering light go in one message to one contact, and come back as one report.

For agents and property managers. Talk to us about a property.

JO

John Owen

Founder

Ample Trade, every trade a property needs held by one accountable team on one contact, across the Eastern Suburbs and the Sydney CBD.

Work OrdersProperty ManagementMaintenanceTenancyScheduling

Send the work order.

One accountable team responds the same day with the plan and the quote.

Send a work order