Premium Apartments In Double Bay And Darling Point
Trade work in a premium apartment in Double Bay or Darling Point is judged by what it leaves behind as much as by what it fixes. High-specification finishes, imported fittings and long-term owners mean the protection, the parts and the match are settled before a tool comes out.
A leaking mixer is the same fault here as anywhere else. The difference is that the fix sits in a marble vanity, on a timber floor, in a home where the owner notices a scratch.
The building stock
Double Bay has premium apartment blocks and boutique hotels around the village, with high-specification interiors throughout. Darling Point, on the point between Rushcutters Bay and Double Bay, is known for grand period apartment blocks and residences held by long-term owners.
Many of these apartments have been renovated to a high standard inside older buildings. That combination means fine finishes sitting directly over old pipes and wiring, and most of the difficult work happens where the two touch.
Protection comes first
The floor is protected from the front door to the work area, with a hard cover over timber and stone. Dust sheets go over joinery and furniture, and any dust-making work has extraction running beside it.
The lift gets booked and padded through the building manager, and the route through the lobby is agreed before anyone arrives. None of this shows at the end of the job, which is how you know it was done properly.
Stone
Marble, travertine and limestone react to acids, so a splash of the wrong cleaner leaves a dull mark that does not wipe off. Acid-cure silicone, the kind that smells of vinegar, can mark natural stone as well. Neutral-cure silicone is what goes around stone vanities and benchtops.
Drilling into stone for a towel rail or a shower screen is slow, cooled work with the right bit and no hammer action, and every position is measured twice before the first hole.
Imported tapware
A European mixer takes a cartridge made for that model. Forcing a near match is how a small drip becomes a damaged body.
The model is identified from a photo or the maker's mark before the trip, and the part is sourced from the maker's supplier, which saves the tenant or owner a second interruption. The fault itself is covered in [dripping taps and mixer cartridges](/blog/dripping-taps-and-mixer-cartridges).
Lighting and heating
Dimmable LED systems are sensitive to the match between lamp and dimmer, and swapping a single fitting for a different brand can bring flicker to a whole room. Lamp changes start with finding out what is already there, which is the approach in [downlights and LED retrofits in older ceilings](/blog/downlights-and-led-retrofits-in-older-ceilings).
Bathrooms in these apartments often have heated floors or towel rails on their own circuits. A heating cable under the tile is reason enough to find out what lies beneath before drilling anything, and [heated bathroom floors and towel rails](/blog/heated-bathroom-floors-and-towel-rails) explains why.
Paint and joinery
Custom colours do not come off a shelf. The original paint record is the first thing to ask for, and without one, the colour is matched from a sample taken from the wall itself, somewhere it will not be seen.
Timber veneers and painted cabinetry are repaired so the join disappears, with new hardware from the same maker wherever it is still made. A damaged panel matched properly is worth more to the owner than a quicker patch that shows in the afternoon light.
Older services behind new finishes
In a period block, the pipes and risers behind a new marble wall can be many decades old. When one fails, the access is the difficult part, because reaching the fault can mean opening a wall that cost a lot to finish.
So a leak here gets more diagnosis before any cutting. Moisture readings and a pressure test come first. Any opening is then planned with the rebuild already in mind, including spare stone or tile where the owner has kept some.
Access and reporting
When the owner is away, an agent or a building manager is the one looking after the apartment. Keys, alarm codes and access times are held properly, and the work is reported with dated photos so the person responsible has seen the result without having to attend.
Ample has worked the Eastern Suburbs for 16 years, and the standard here is the same as everywhere else. It sits higher than the owner's own, so nobody has to come and check. See our maintenance in Double Bay and Darling Point.
Related Articles
Tell us about your building.
We will respond with a clear understanding of how we can help.
Get in Touch