Mould On A Bedroom Wall In A Rental
Mould on a bedroom wall comes from one of two places: moist indoor air condensing on a cold surface, or water getting into the wall from outside or from a pipe. The two look alike from across the room and cleaning fixes neither, so the job starts with working out which one it is.
Getting that wrong is why the same patch comes back every winter under fresh paint.
Why bedrooms get it
People breathe out moisture all night, usually with the door shut and the window closed against the cold. That damp air finds the coldest surface in the room, and in a brick apartment block that is often an outside wall on the south side, which never gets direct sun.
A wardrobe or a bed pushed against that wall makes it worse, because the air behind it stays still and cold. None of this comes down to how clean anybody keeps the room. Plenty of tidy bedrooms in older buildings grow mould, because the wall is cold and the air has nowhere to go.
Reading the pattern
Condensation shows up as a spread of small dark spots. Look in the top corners of outside walls, along the join between wall and ceiling, behind furniture and around window frames. It is worst in winter.
Water entry tends to have an edge. Look for a stain or tide mark, blistered or bubbling paint, a white powdery crust on the wall, or a patch that darkens after rain. Its position points at the source, such as under a window, below a balcony, or on a wall shared with a shower. Damp low on the wall has its own causes, set out in [damp in basements and ground floor walls](/blog/damp-in-basements-and-ground-floor-walls).
A simple check
Tape a square of aluminium foil to the wall, sealed on all four sides, and leave it for a day or two. Droplets on the room side of the foil point at condensation. Moisture on the wall side means the wall itself is wet, and that changes the whole job.
A trade will add a moisture meter. It reads the wall at several points against a dry section of the same wall, and a high reading well away from any window is a strong sign that water is coming from somewhere it should not.
Fixes for condensation
The answer is to move the damp air out and to warm or expose the cold surface.
Ventilation. Windows that actually open, with sash cords and winders working, come first. Many older buildings also have wall vents that were painted or plastered over years ago, and reopening them gives the room some air movement with the window shut.
The rest of the unit. A bathroom fan that discharges into the ceiling, or a laundry with no exhaust, feeds moisture into the whole apartment. Clothes drying indoors adds more, and [clothes drying in apartments and where the moisture goes](/blog/clothes-drying-in-apartments-and-where-the-moisture-goes) covers the options.
Air gaps. Pulling a wardrobe a little way off an outside wall lets air move behind it. In a built-in wardrobe on a cold wall, vents in the doors do the same job.
Insulation. On a top floor, ceiling insulation that has been disturbed or never fitted leaves a cold ceiling, and that is an easy fix when the roof space can be reached.
Fixes for water entry
Water comes first. A leaking window head, a failed balcony above, a shower on the other side of the wall or a slow pipe leak all have to be found and stopped, and only then can the wall begin to dry.
Paint on a damp wall traps the moisture in. The patch returns.
Cleaning and repair
Mould on sound paint is cleaned off with a mould cleaner, with the window open, gloves and a mask on, and the room left to dry properly.
Plasterboard that has been soaked, or where the mould has grown through the paper face, is cut out and replaced. The steps are in [plaster repair after a water leak](/blog/plaster-repair-after-a-water-leak). Carpet and underlay at the foot of a wet wall are lifted and checked as well, because that is where the smell tends to live.
Then the wall gets a stain-blocking sealer, a mould-resistant paint and a repaint from corner to corner. Mould-resistant paint only slows things down on a wall that stays wet, so it comes last, and it is never the repair by itself.
For the agent
A dated photo of the patch, the moisture readings and a plain statement of the cause make the conversation with the owner short. The owner sees why the repair was what it was, and the next tenant is not handed the same problem. How that record works is covered in [the photo report and why it settles arguments](/blog/the-photo-report-and-why-it-settles-arguments).
Check the wall again after the next run of wet weather. That is the real test.
A bedroom mould job can run from the window to the roof to the shower next door. When one team reads all of that from the first look, the patch is treated once, at its cause.
Related Articles
Send the work order.
One accountable team responds the same day with the plan and the quote.
Send a work order